MAGX2:

The MAGX2 is an improved version of the successful Arkon MAGX1. It continues with the philosophy of the modular design “Plug and Play”; It is a flexible device for customising all applications, from the most simple, where costs are very important to the most demanding, requiring a high technical solution such as GPRS or TCP/IP communication. The transmitter consists of the low-cost basic unit plus optional modules according to the end-user’s requirements. Each module is in fact a small electronic board, the size of a large postage stamp, which can be freely installed and removed from the main board in seconds.

MAGX2 features

  • Accuracy +-0.2% (0.5 to 10 m/s)of actual values
  • Real time clock has been added to the basic transmitter unit.
  • Micro Secure Digital card for data-logging purposes compatible with all main producers.
  • Channel frequency output: Binary and Frequency modules have been combined in one. Open collector output is completely included in the
    PULSE module.
  • Intelligent sensor design – the signal is converted from analogue to digital in the sensor and sent to the transmitter using MODBUS RTU protocol.

 

 

Available downloads:

 

• brochure • manual • datasheet • software • software manual • pictures

Other features:

  • Connections available: DIN, ANSI, JIS, wafer, Tri-clamp, ANSI 11851. Others on request
  • Liner materials available: Hard rubber, PTFE, PFA, soft rubber.
  • Electrode material stainless steel as standard. Also hastelloy C, tantalum, titanium and platinum available
  • Sizes available from 10mm to 1000mm
  • Auto cleaning electrodes
  • IP67 transmitter protection. IP68 sensor protection available
  • 3rd electrode for earthing and empty pipe detection
  • Temperature sensor - to measure temperature of the measured medium
  • The sensor has automatic temperature compensation.
  • The flow meter is equipped with an automatic self-diagnostic tool for the sensor. A problem with the communication signal between sensor and transmitter will be reported on the transmitter display.
  • Bi-directional measurement
  • Graphic display with 6 touch buttons - Multi-language menu. Higher protection via look out system for touch buttons and 3 levels of passwords. User, Service, Factory settings
  • Universal power supply unit 90-250VAC +/- 10%, 50-60Hz. 24VDC and 12VDC are also available.
  • All communication based on MODBUS RTU (only one communication module can be installed at the same time):
    • BLUETOOTH as a communication option. A mobile network is not required
    • TCP/IP module – Intranet use is extremely straightforward with the flowmeter having its own IP- address. With the correct setup, the same module can be used via the internet. All over the world using MAGX1 software is possible to connect to the flowmeter via internet.
    • GPRS Wireless communication system which is performed by the GPRS protocol.
    • RS232, RS485 and USB communications also available
  • Data downloading and communication does not require disassembly of the housing. No removal of large
    covers or lids is necessary. When using RS485, Bluetooth, GPRS or TCP/IP communication, data-downloading and communication is provided with IP67 protection.
  • Three ways to remote mount the transmitter.
    • Wall mounted
    • Panel mounted
    • DIN-rail mounted